Carlson BRx7 GNSS Receiver

Carlson BRx7 GNSS Receiver

Home » Shop » Carlson BRx7 GNSS Receiver

Carlson BRx7 GNSS Receiver

$12,995.00

Contact James@allenbuildinstruments.com or
Call (919) 701-7991 for Best Pricing

The BRx7 is Carlson’s all-new multi-GNSS, multifrequency smart antenna. The BRx7 provides robust performance and high precision in a compact, rugged package with tilt compensation ability. With multiple wireless communication ports and an open GNSS interface, the BRx7 can be used in a variety of operating modes.

Product description

The Carlson BRx7 GNSS Receiver is Carlson’s all-new multi-GNSS, multifrequency smart antenna. The BRx7 provides robust performance and high precision in a compact, rugged package with tilt compensation ability. With multiple wireless communication ports and an open GNSS interface, the BRx7 can be used in a variety of operating modes.

Use the BRx7 as a precise network rover to work with your GNSS VRS network, or set up your BRx7 as an easy-to-use base-rover package with industry-leading performance via the internal long-range and spread-spectrum radio or cellular communication via Carlson’s Listen-Listen, a unique cloud-based low latency service that eliminates baseline length restrictions of UHF radios. With only an Internet connection, you can enjoy a simple, easy-to-use base-rover solution that can also support a single base with multiple simultaneous rover connections.

The BRx7 provides state-of-the-art RTK performance when receiving corrections from a static base station or network RTK correction system. With multiple connectivity options, the BRx7 allows for RTK corrections to be received over radio, cell modem, Wi-Fi, Bluetooth, or serial connection. The BRx7 delivers centimeter-level accuracy with virtually instantaneous initialization times and cutting-edge robustness in challenging environments.

The BRx7 also features proprietary SureFix® technology to provide high fidelity information about the quality of the RTK solution, allowing enhanced and improved RTK accuracy, availability, and precision.

The built-in web user interface (WebUI) can be used to monitor and control the receiver status and operation, as well as to upgrade the BRx7 with new firmware and activations. The BRx7 is immune from magnetic interference and is both Athena™ -enabled and Atlas®-capable (subscription required).

Receiver Type:

Multi-Frequency GPS, GLONASS, BeiDou,
Galileo, QZSS, IRNSS, and Atlas L-band

Signals Received:

GPS L1CA/L1P/L1C/L2P/L2C/L5
GLONASS G1/G2/G3, P1/P2 BeiDou B1i/B2i/B3i/B10C/B2A/B2B/ACEBOC GALILEO E1BC/E5a/E5b/E6BC/ALTBOC
QZSS L1CA/L2C/L5/L1C/LEX IRNSS L5 Atlas

Channels:

800+

RTK Formats:

RTCM2.1, RTCM2.3, RTCM3.0, RTCM3.1, RTCM3.2 including MSM, CMR, CMR+

Recording lntervals:

Selectable from 1, 2, 4, 5, 10 Hz (20 Hz or 50 Hz optional)
L-Band Receiver Specifications

Receiver Type:

Single Channel

Frequency Range:

1525 to 1560 MHz

Sensitivity:

-130 dBm

Channel Spacing:

5.0 kHz

Satellite Selection:

Manual and Automatic

Reacquisition Time:

15 seconds (typical)

Click Here To Check Full Specifications

  • Multi-frequency GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, and Atlas L-band
  • Long-range RTK baselines up to 50 km with fast acquisition times with the use of Listen-Listen***
  • UHF (400 MHz & 900 MHz), cellular, Bluetooth, and Wi-Fi wireless communication
  • The BRx7 Athena GNSS engine providing best-in-class RTK performance
  • Internal tilt sensor corrects collected point coordinates to within 2 cm

Revised Carlson BRX7 VS Competitors_Page_1

Receiver Type:

Multi-Frequency GPS, GLONASS, BeiDou,
Galileo, QZSS, IRNSS, and Atlas L-band

Signals Received:

GPS L1CA/L1P/L1C/L2P/L2C/L5
GLONASS G1/G2/G3, P1/P2 BeiDou B1i/B2i/B3i/B10C/B2A/B2B/ACEBOC GALILEO E1BC/E5a/E5b/E6BC/ALTBOC
QZSS L1CA/L2C/L5/L1C/LEX IRNSS L5 Atlas

Channels:

800+

RTK Formats:

RTCM2.1, RTCM2.3, RTCM3.0, RTCM3.1, RTCM3.2 including MSM, CMR, CMR+

Recording lntervals:

Selectable from 1, 2, 4, 5, 10 Hz (20 Hz or 50 Hz optional)
L-Band Receiver Specifications

Receiver Type:

Single Channel

Frequency Range:

1525 to 1560 MHz

Sensitivity:

-130 dBm

Channel Spacing:

5.0 kHz

Satellite Selection:

Manual and Automatic

Reacquisition Time:

15 seconds (typical)

Click Here To Check Full Specifications

  • Multi-frequency GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, and Atlas L-band
  • Long-range RTK baselines up to 50 km with fast acquisition times with the use of Listen-Listen***
  • UHF (400 MHz & 900 MHz), cellular, Bluetooth, and Wi-Fi wireless communication
  • The BRx7 Athena GNSS engine providing best-in-class RTK performance
  • Internal tilt sensor corrects collected point coordinates to within 2 cm

Revised Carlson BRX7 VS Competitors_Page_1

Title

Go to Top